Garmin nuvi 1300 Series Quick Start Manual page 3

Setting Up Your nuvi
Before mounting the ntivi, see the Important Safety and Product Information guide for information
about laws pertaining to windshield mounting.
Cradle
"-
Vehicle power
cable
Mounting Your nuvi
1. Remove the clear plastic from the suction cup. Place the suction cup on the
windshield. Suction cup mount
2. Flip the lever back toward the windshield.
3. Snap the cradle onto the suction cup arm.
4. Plug the vehicle power cable into the back of
your nuvi.
5. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it is plugged in and the vehicle is
running. Follow the on-screen instructions.
6. Fit the bottom of your nuvi into the cradle.
7. Tilt your nuvi back until it snaps into place.
8. If you are using a traffic receiver in Europe,
connect the external antenna to the traffic
receiver and secure it to the windshield using
the suction cups. (Traffic receivers are included
in some nuvi packages.)
WARNING: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
nuvi
1300
Senes
Quick Start Manual 3