iRobot Roomba 700 series Owner's Manual page 7

Problems while cleaning
Your Roomba Likely cause
blinks and says...
Error 1. Move Roomba Your Roomba is stuck
to a new location then with a wheel hanging
press CLEAN to restart. down.
Error 2. Open Roomba's Your Roomba's main
brush cage and clean brushes can't turn.
brushes.
Error 5. Spin Roomba's Your Roomba's side
side wheels to clean. wheel is stuck.
Error 6. Move Roomba Your Roomba's cliff
to a new location then sensors are dirty or
press CLEAN to restart. your Roomba is
hanging over a drop.
Error 7. Spin Roomba's Your Roomba's side
side wheels to clean. wheel is stuck.
Error 9. Tap Roomba's
Your Roomba's bumper
bumper to clean. is compressed or the
bumper sensor is dirty.
Error 10. Spin Roomba's Your Roomba's side
side wheels to clean. wheel is stuck or its
bumper isn't detecting
obstacles.
Your Roomba's battery
Roomba. is dead.
Problem solving |
What to do
Ensure your Roomba's
wheels are firmly on the floor.
Start in a new location.
Remove and clean your
Roomba's brushes.
Clean your Roomba's side
out and check that they
both turn freely. Start in a
new location.
Wipe your Roomba's cliff
sensors with a dry cloth.
Start in a new location.
Clean your Roomba's side
them in and out and check that
they both turn freely.
Start in a new location.
Briskly tap your Roomba's
bumper several times to
dislodge any debris that
may be trapped underneath.
If your Roomba is circling in
one place, clean side wheels.
check that they both turn. If
it's not circling in one place,
Roomba may be in a very large
room. Use a Virtual Wall to
create a smaller cleaning area.
charger or place it on the
Home Base to charge.
11
When running or charging
Problems while charging
Your Roomba Your Roomba Your Roomba
blinks... displays... says...
1 blink - Charging error 1
2 blinks Err 2 Charging error 2
3 blinks Err 3 Charging error 3
5 blinks Err 5 Charging error 5
6 blinks Err 6 Charging error 6
7 blinks Err 7 Charging error 7
Language selection mode
Your Roomba can provide troubleshooting messages in English, French, German,
Setting the language
The default language is English. To change this:
1. Turn ON your Roomba by pressing CLEAN.
4. Now press CLEAN repeatedly until you hear the language you want.
Meijer.com
Likely What to do
cause...
Your Roomba's Check that you
battery Isn't
removed pull-tab
connected. from the battery.
Remove the bat-
tery cover of your
Roomba to remove
& reinstall battery.
Your Roomba Let your Roomba
cool down for at
has a charging
error. least an hour & try
charging again.
Your Roomba Reset Roomba's
software and
has a charging (pg13)
error. try charging again.
Your Roomba Reset Roomba's
has a charging software and
(pg13)
error. try charging again.
Your Roomba
Let your Roomba
has a charging
cool down for at
error.
least an hour & try
charging again.
Let your Roomba
Your Roomba's
battery Isn't cool down for at
cooling. least an hour & try
charging again.
12