Philips 40PFL58x6D User Manual page 26


Once the USB hard disk device is
formatted for this TV, you cannot use it
on another TV or PC. Keep it
connected permanently to the TV.
1. Connect the USB hard disk to the USB
connector on the side of the TV.
2. Switch on the TV, and if necessary the
hard disk, if it has an external power source.
3. Switch to a digital TV channel and press
(pause) to start formatting.
4. Follow the onscreen instructions.
Warning:
The formatting process may take some time.
Do not switch off the TV or disconnect the
USB hard disk until this process is complete.
EN 26
Pause a live TV broadcast
1. On a digital channel, press
pause a TV broadcast.
2. Press (play) to continue watching.
The status bar shows the following time
indicators:
A. When the program is paused for the first
time.
B. Where the paused program is currently
playing.
C. Where the live program is currently
playing.

Press (reverse) or
select where you want to start viewing
the stored broadcast.

Press (stop) to switch to live TV
broadcast again.
(pause) to
(forward) to