Standard Features - Atlas AH99-8ST Instructions Manual

Polestar
Uni . Frame - Galvanized
OUTDOOR SPEAKER MOUNTING SYSTEM
The UniFrame is a complete
mounting solution for outdoor
loudspeakers. Its design combines the
attributes of the PoleStar stainless "a-la-
carte" version into just two models produced
in steel and then galvanized to an outdoor
weather rating.
The UniFrame reduces the amount of parts required for the job
site and saves installation time by combining the support arm
and the pole adapter together into one assembly. In addition,
two stainless steel band kits are included, which require a
socket set only.
The support arm is welded in two places for extra strength and
durability. Each arm includes three attach point mounting holes
2" - 6" Diameter Poles.
Supports one speaker only.
PM-24-6DOWN-G
On 6" and Larger Diameter Pole
for 3- WAY Installation s
PM-24-6UP- G
MADE IN THE US A
6" and Larger Diameter Poles
Supports up to three speakers.
PM-24-6UP-G
s For 3-way Installations, use on e
PM-24-6UP-G and one PM-DA-48-G
www.allenpr oducts.co m
™
AH Series Speaker and Yoke
at the end of the arm that allow the installer to select the
desired distance between the loudspeaker and the pole.
One design accommodates pole diameters from 2" to 6"
(50-152 mm) and the other from 6" (152 mm +) diameter
poles and columns and larger.

STANDARD FEATURES:

• Uni-Frame assembly adds strength
and reduces installation time.
• Longer pole interface increases
structural capacity.
• Rugged outdoor galvanized finish
to ASTM A123 and ISO1461
specifications.
• Three arm mounting points to
accommodate all speaker models.
• Angled brace increases structural
stability during severe weather
conditions.
• Support arm may be oriented up or
down for installation flexibility.
• Dual adapter may be secured to the
Uni-Frame for a three-way installation.
PM-24-6UP-G
provided by Atlas