14 Troubleshooting
If GoGear opus is not working properly or the
display freezes, you can reset it without losing
data:
How do I reset GoGear Opus?
•
Insert a pen tip or other object into
the reset hole located at the bottom of
GoGear opus. Hold until the player shuts
down.
•
If the reset option is unsuccessful, follow
the steps how to recover GoGear opus
with the Philips Device Manager:
1
on your computer, select Start >
Programs > Philips Digital Audio Player
> Opus Device Manager > Philips
Device Manager to launch the Philips
Device Manager.
2
Turn off GoGear opus before you
continue.
3
press and hold the volume button
while you connect GoGear opus to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges GoGear
opus and enters the recovery mode.
5
on the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect GoGear opus from your
computer.
7
Restart GoGear opus.
EN
31