For Left Rear Piping - LG LS-E0960CL Manual

For left rear piping

3. Insert the connecting cables, the drain pipe and
connecting piping through the piping hole on
the wall.
4. Connect the piping and the indoor tubing, and
drain hose and drain pipe and place the drain
pipe into the chassis.
• Don't connect the cable to the indoor unit.
• Make a small loop for easy connection later.
• Glue up the connection portion of drain hose and
drain pipe.
Pipe Size
Liquid Side (1/4")
Gas Side (3/8")
Gas Side (1/2")
5. Bend the drain hose and bind the drain hose,
the piping and the connecting cables altogether.
Taping
Tubing holder
Push
2
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Torque
1.8kg . m
4.2kg . m
5.5kg . m
Drain hose
Hook
1
Installation plate
To remove the holder,
press the bottom of
chassis near the holder
upward and pull the tab
out of its hole.
Indoor
Indoor unit tubing
Spanner
Drain hose
- 26 -
Pull
Pull
Tubing holder
Pull
2
Press
1
Drain hose
Outdoor
Connecting cable
Connecting piping
Drain pipe
Flare nut Pipings
Torque wrench
Plastic bands Insulation material
Drain pipe
Adhesive
LGE Internal Use Only