FIELD REPLACEABLE UNIT DOCUMENTATION
VOLUME CONTROL BOARD REMOVAL
Volume control board
1. Remove two M2.5x4 black flat head screws securing
the volume control board.
2. Disconnect the volume control cable from PJ61 and
the left speaker cable from PJ60 on the volume control
board.
FDD REMOVAL
M2.5x6 silver screws
1. Disconnect the FDD cable from PJ344 on the
system board.
2. Remove two M2.5x6 silver screws securing the
FDD assembly.
3. Lift out the FDD assembly.
Satellite
1800 Series
Volume
control cable
M2.5x4
black
flat head
screws
Speaker cable
PJ344
FDD cable
FDD assy
TOSHIBA
Tough Enough for Today's World
TM
SPEAKERS REMOVAL
Left
speaker
M2.5x6 Silver screws
1. Remove four M2.5x6 silver screws securing both
the left and right speakers.
2. Lift out both speakers.
4. Remove three M2.5x3 black screws securing the
FDD to the FDD case and separate the FDD from
the case.
5. Disconnect the FDD cable from the FDD.
Right
speaker
FDD cable
M2x3 silver screws