Canon imageRUNNER 1750i User Manual page 77

3
4
4
IMPORTANT
• Rolled or curled paper must be straightened out prior to use.
• Make sure that the height of the paper stack does not exceed the loading limit marks
(
• Make sure that the paper size setting of the paper drawer matches the size of the
paper that is being loaded.
NOTE
• Each paper drawer holds about 550 sheets of paper (80 g/m
• If there are instructions on the package of paper about which side of the paper to load
facing up, follow those instructions.
• When printing one-sided documents on paper loaded in the paper drawer, the side
facing up is the one printed on.
• If problems occur, such as poor print quality or paper jams, try turning the paper stack
over and reloading it.
4-4
Paper Drawers
) both on the left and back sides of the slide guides.
Open a package of paper and
take out the paper stack from the
package.
CAUTION
Take care not to cut your hands on
the edges of the paper when
loading it into the machine.
IMPORTANT
Rewrap any remaining paper in its
original package, and store it in a dry
place, away from direct sunlight.
NOTE
• For high-quality printouts, use paper
recommended by Canon.
• Before loading paper, always fan the
sheets several times, and align the
edges to facilitate feeding.
Load the paper stack into the
paper drawer.
Even out the edges of the paper stack, and
load the paper stack against the right wall
of the paper drawer.
CAUTION
Take care not to cut your hands on
the edges of the paper when
loading it into the machine.
2
).