Table of Contents
Advertisement
PRINCIPLE OF OPERATION
Electronic stability programme
(ESP)
WARNING
ESP does not relieve you of your
responsibility to drive with due care
and attention.
B
B
A
E72903
A
without ESP
B
with ESP
The ESP supports stability when the
vehicle starts to slide away from your
intended path. This is performed by
braking individual wheels and reducing
engine torque as needed.
The system also provides an enhanced
traction control function by reducing
engine torque if the wheels spin when you
accelerate. This improves your ability to
pull away on slippery roads or loose
surfaces, and improves comfort by limiting
wheel spin in hairpin bends.
Stability control
B
B
A
A
101
Stability control (ESP) warning lamp
The ESP warning lamp will flash when the
system is operating. See Warning
lamps and indicators (page 59).
Emergency brake assist
WARNING
Emergency brake assist does not
relieve you of your responsibility to
drive with due care and attention.
Emergency brake assist will detect when
you brake heavily by measuring the rate
at which you press the brake pedal. It will
provide maximum braking efficiency as
long as you press the pedal. Emergency
brake assist can reduce stopping
distances in critical situations.
USING STABILITY CONTROL
Note: The system will be switched on
automatically every time you switch the
ignition on.
Vehicles with stability control
(ESP) switch
Press and hold the switch for one second.
The switch will illuminate. A message will
be shown in the display. See
Information messages (page 70).
Press the switch again to turn the system
on.
For item location: See Quick start (page
10).
Advertisement
Table of Contents
