Broan Sensaire MS90 Specification Sheet

MODEL MS90 & MS130
SENSAIRE
MOTION SENSING
BATH FANS
A modern-styled, high performance bath fan that turns
itself ON and OFF using built-in motion sensing circuitry.
FEATURES
GRILLE:
Conceals interior
•
Low profile styling blends well with any decor
•
Non-yellowing matte white polymeric
•
Torsion spring mounting - no tools required
•
BLOWER:
Plug-in, permanently lubricated
•
Dynamically balanced centrifugal blower wheel for quiet,
•
efficient performance
Low RPM ultra-quiet operation
•
Quick one-screw installation/removal
•
Resilient anti-vibration motor mounts
•
HOUSING:
Rugged 24 gage steel construction finished with black,
•
electrically-bonded epoxy paint
Tapered, 4" round polymeric connector-no metallic clatter
•
7-5/8" height allows for 2" x 8" (nominal) joist installations
•
Mounts between joists or directly to joist
•
Adjustable mounting brackets span up to 24"
•
MOTION SENSOR:
Turns fan ON when motion is detected
•
Remains ON for an adjustable 5 to 60 minutes after
•
motion is no longer detected
Fan may be controlled automatically (using sensor) or
•
manually with accessory controls
Prolongs fan life since fan runs only when necessary
•
Saves energy because unit runs for the time required. A
•
unit controlled with a wall timer may keep fan ON longer
than required or turn it OFF before room is sufficiently
ventilated
CONTROLS: Designed by Broan for use with this product
(purchase separately)
Model 68V, P68V(Ivory)/68W, P68W(White), 2-Function
•
Wall Control
U.L. listed for use over tub/shower enclosure when connected
to GFCI branch wiring.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCE QTY.
®
REMARKS
SPECIFICATION SHEET
TYPICAL SPECIFICATION
Ventilator shall be Broan Model MS90 (MS130).
The units will have a motion sensor that will turn fan "ON"
automatically when motion is detected. It shall be user-
adjustable to turn "OFF" 5-60 minutes after motion is no
longer detected.
Ventilator shall have steel housing finished with black
electrically-bonded epoxy paint. Mounting brackets to be
adjustable. It shall be ducted to a roof or wall cap using 4"
round ductwork. Automatic backdraft damper shall be located
within duct connector.
Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor, mounted
with resilient anti-vibration mounts.
Air delivery shall be no less and sound levels no greater than
listed for each model. All air and sound ratings shall be
certified by AMCA and/or HVI. Units shall be U.L. listed. For
use over tub/shower enclosure when connected to GFCI
branch wiring.
Broan-NuTone LLC certifies that the models shown
herein are licensed to bear the AMCA Seal. The ratings
shown are based on tests and procedures performed in
accordance with AMCA Publication 211 and AMCA
Publication 311 and comply with the requirements of the
AMCA Certified Ratings Program.
Project
Location
Architect
Engineer
Contractor
Submitted by Date
10A 99041860C