Sony KD-30XS955 Service Manual page 264

Notes on Using This Connection
To Do This ... Do This ...
Set up a digital For digital i.LINK devices (devices that require only
i.LINK device the i.LINK connection), no setup is necessary. The TV
automatically recognizes the device as soon as the
connection is made.
Set up an i.LINK 1 Connect analog A/V cables to the VIDEO 3 input
device that supports
an EIA-775A analog
2 Use the i.LINK Control Panel to activate the analog
connection
Notes on Connecting i.LINK Devices
To connect two or more i.LINK devices, use i.LINK cables to connect
them as shown below.
A B
i.LINK
You can connect up to 63 i.LINK devices. However, the maximum
number of cables in any serial route is 16.
A B
i.LINK
Do not connect i.LINK devices in a way that creates a loop.
A
Connecting non-compatible devices, such as PCs or PC peripherals,
may result in malfunctions.
(see page 86).
connection to your i.LINK device (see page 91).
C
i.LINK i.LINK
C
i.LINK i.LINK
F
i.LINK i.LINK
i.LINK
B
i.LINK i.LINK
D E
i.LINK
D E
i.LINK
G
C
87