Turning On And Off The Camera - Nikon Coolpix S9100 Quick Start Manual

Turning On and Off the Camera

Press the power switch to turn on the camera. The
power-on lamp (green) will light, and then the monitor
will turn on (the power-on lamp turns off when the
monitor turns on). To turn off the camera, press the
power switch again. When the camera is turned off, the
power-on lamp and the monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in
playback mode (A 30).
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button, c button, or b (e movie-record) button
- Rotating the mode dial
• In shooting or playback mode, the camera will enter standby mode in about one minute (default
setting).
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A 184) in the setup menu (A 169).
Charging the Battery
19