Fujitsu Plasmavision PDS4214W-S Service Manual page 25

7. Removing the Main/Digital PCB Assy
(1) Remove the Rear Case (Upper).
-Remove the 19 screws.
(2) Remove the Video PCB Unit.
(3) Remove the Frame Panel MID (Lower).
-Remove the 3 screws.
(4) Remove the 7 screws at the input terminals.
(5) Remove the 5 screws at the shield bracket of the
Main/Digital PCB Assy.
(6) Remove the shield bracket and connectors, and
remove the screw.
View after Rear Case (Upper) removed
– 34 –