How To Assemble - Hoover Stick Vacuum Owner's Manual

Unpacking
!
Unpack cleaner from carton and
identify parts shown.
A. Handle Section
B. Cleaner Body
C. Hose with tool (some models)
D. Nozzle
C
A B
D
This cleaner is
intended for house-
hold use.
STANDARD
NOZZLE
Depending on the model you purchased,
ONE of the above Rug/Floor Nozzles is
included with your cleaner.
3
The assembled cleaner will look
like the drawing below.
Cord hook
Hose hook
(some models)
Hose
(some models)
Cleaner body
ON-OFF/Speed
selector switch
Carrying
handle
Dirt cup
DELUXE
NOZZLE
Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about
your cleaner or questions regarding its use. Look on the list pro-
vided with the product for your local Hoover Factory Service
Center or in the Yellow Pages under "Vacuum Cleaners - House-
hold" for the nearest Authorized Hoover Warranty Service Dealer
(Depot) or call:
1-800-944-9200 for an automated referral of
authorized service outlet locations (U.S. only)
1-330-499-9499 to speak with a representative in the
Hoover Consumer Response Center.
DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT
TO NORTH CANTON FOR SERVICE.
CORD HOOKS
TAB
DELUXE
WHEELED
NOZZLE
HOSE
MODELS
OR

How to assemble

Unpack cleaner and remove all
cardboard. Remove the tape
securing the hose hook and screw
to the handle. A Phillips screw-
driver is needed for assembly.
A. Attach handle
1. With cord hooks upward, slide
handle onto cleaner body.
2. For attached hose models, place
hose hook on handle by first
inserting tab into slot.
SLOT
3. Insert screw and secure handle
to cleaner body.
Continued
4