Display Mask Removal - Toshiba Satellite 1700 Series Replacement Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

12.1" DISPLAY MASK REMOVAL

Mask seals
1. Remove four mask seals at each corner of the
display assembly.
2. Remove four M2.5x5 brass screws securing the
display mask.
3. There are 22 latches securing the display mask.
Carefully insert your fingers between the display mask
and the LCD module and pry open the latches starting
from the top six latches, to the five latches on the right
and left sides, ending with the six bottom latches.
Satellite
1700Series
Latch
Display
mask
LCD
TOSHIBA
Tough Enough for Today's World
TM
FL INVERTER AND 12.1" LCD REMOVAL
M2x5
brass
screws
LCD/FL inverter cable
1. Remove two M2.5x5 black screw securing
FL inverter board.
2. Carefully lift up the FL inverter board and
disconnect the LCD/FL inverter cable from CN1 and
the FL cable from CN2.
3. Remove four M3X6 brass screws securing the
LCD module.
4. Carefully rotate the LCD module from right to left
of the LCD cover.
5. Disconnect the LCD/FL inverter cable from the LCD
module and remove the LCD from the computer.
LCD module
FL cable
M2.5x5
black
screws
FL inverter board