V. Exposure Mechanisms; A. Laser/Scanner Assembly - Canon LBP-2000 Service Manual

V. EXPOSURE MECHANISMS

A. Laser/Scanner Assembly

1. Construction
The following show the construction of the
laser/scanner assembly.
[1]
[1] Scanner assembly [2] Laser assembly
Figure 3-5-1
2. Removing the laser/scanner assembly
1) Remove the cartridge.
2) Remove the connector cover [1] and con-
nector [2].
3) Remove the 5 claws [3], and detach the
scanner upper cover [4].
[3]
[4]
[2]
[1]
Figure 3-5-2
[2]
[3]
4) Remove the dust-proofing sponge [5].
Figure 3-5-3
5) Disconnect the 3 connectors [6].
[6]
Figure 3-5-4
6) Remove the 4 screws [7], and detach the
laser/scanner assembly [8].
[7]
[8]
Figure 3-5-5
Caution: The laser/scanner assembly can-
not be adjusted in the field. Do not
disassemble it.
CHAPTER 3
[5]
3 - 25