Play The Music; Power On The Unit; Adjusting The Gain - Fostex HP-V1 Owner's Manual

Play the music

„ Connection and reproduction
„
• The power must be off when you make connections.
• The volume of each product must be set to the minimum when powering on after the connection.
1 Connect to an audio player.
Connect the audio player and the unit using the supplied mini phone cable.
* There is an audio input terminal on the front and back of the unit. You can choose to use either.
If connect to both, only sound input through the front one is played.
2 Connect to the headphones.
Connect the headphones to headphone output terminal.

3 Power on the unit.

The unit is powered on by turning the power switch/volume knob to the right until it makes a
clicking sound.
* After the unit is powered on, no sound is played while the power indicator lights in red (standby
mode approx. 30 seconds). You can play sound after the power indicator lights in green.
4 Play the music source of the audio player.
5 Adjust the volume.
To turn up the volume, turn the power switch/volume knob to the right.
„ Adjusting the gain
„
Adjust the gain switch according to your headphone impedance. Switch the gain switch up to raise
amplification, and down to lower amplification.
or
5