Connecting The Product Safely - Brother HL-L8250CDN Product Safety Manual

Connecting the product safely

WARNING
There are high voltage electrodes inside the product. Before you clean the inside of the product,
make sure you have unplugged the telephone line cord first (MFC only) and then the power cord
from the electrical socket. Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a
qualified electrician.
DO NOT allow anything to rest on the AC power cord. DO NOT place this product where people
may step on the AC power cord or in a position that could trap or constrict it. Doing so may cause
the cord to become worn or frayed.
(Example for Australia and New Zealand)
(Example for Australia and New Zealand)
1
11