Fujitsu Plasmavision PDS4229W-B Service Manual page 34

6.Removing the PDP Unit (1 of 3)
1. Remove the Rear Case.
2. Disconnect the circled connectors
CN751 and CN742 and remove their
wires to the outside of the Main Unit.
3. Remove the 6 circled screws.
(Two screws indicated by the
arrows are inside stand cover.)
4. Remove the Base Frame from the
Front Case together with a panel
and PCBs.
∗ View of removal of the Base Frame
from the Front Case.
– 36 –