Remote Control App for Smartphones ........................7 Headphone Output Connection ............................ 8 Balanced Headphone Jack Pin-out ......................... 8 Using the HA-1 as a Pre-Amplifier or DAC ........................9 RCA Stereo Audio Outputs ............................9 XLR Balanced Audio Outputs ..........................9 ...
Page 4
Power On / Off ................................ 14 The Front Panel Display ............................14 Source Selection ..............................15 Volume Control ............................... 15 Mute ..................................16 Playback Controls ..............................16 Advanced Operations ..............................17 Home Screen Selection ............................17 ...
Important Information Read these instructions. CAUTION Keep these instructions. Heed all warnings. RISK OF ELECTRIC SHOCK. DO NOT OPEN. Follow all instructions. Do not use this device near water. CAUTION: TO REDUCE THE RISK OF ELECTRIC Clean only with a dry cloth. SHOCK, DO NOT REMOVE COVER (OR BACK).
Precautions Before connecting the AC power cord to the Unplug the power cord if you are not going to use appliance, make sure the voltage designation of the product for an extended period of time. the appliance corresponds to the local electrical Hold the power plug when unplugging.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. Legal Notice “Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to ®...
Bluetooth audio transport. The HA-1’s analog audio section is a fully balanced, differential design with a Class A power amplifier circuit that is capable of driving the most difficult of headphones. Throughout the design process, our emphasis was in keeping the audio signal in the analog domain once it leaves the DAC.
Installation Front Panel Controls Volume Source HEADPHONE AMPLIFIER HA-1 Power Button Source Selector Knob IR Sensor Window Power Status Indicator Balanced Headphone Jack Volume Knob 6.35 mm Headphone Jack Front Panel Display Window Mobile USB Audio Input Back Panel Connectors...
Remote Control Remote Control Buttons POWER: Toggle between STANDBY and ON MUTE: Mute audio output VOLUME +/-: Increase and decrease volume PREV: Skip to previous track PLAY / PAUSE: Start or Pause playback NEXT: Skip to next track COAX: Switch to Coaxial Digital Audio Input OPTI: Switch to Optical Digital Audio Input AES/EBU: Switch to AES/EBU Digital Audio Input USB: Switch to USB (Type B) Audio Input...
When using the remote control, the IR Emitter on the front of the remote should be pointed towards the IR Sensor Window on the HA-1 within a ±30° angle and a range of about 26 ft (8 meters). Remote Control App for Smartphones A free remote control app is available for iPhone and Android-based smartphones.
Headphone Output Connection You can connect your headphones to the OPPO HA-1 using either a standard 6.35 mm connector or a 4-pin XLR balanced connector. If your headphones terminate with a 3.5 mm connector, you can use the supplied 3.5 mm to 6.35 mm Headphone Adapter to connect the headphones to the HA-1.
It is muted when the remote MUTE button is pressed. RCA Stereo Audio Outputs You can connect the HA-1 to a power amplifier or a pair of active speakers with RCA analog inputs using RCA audio interconnect cables.
This allows the HA-1 to be turned on and off together with the connected device. The use of Trigger Output or Trigger Input is not required. You can always manually turn on or off the HA-1 using the POWER button on the front panel or remote control.
AES / EBU Digital Audio Input You can connect a device with an AES / EBU digital output into the AES / EBU Digital Audio Input of the HA-1 using an XLR-3 (110 ohm) digital cable. The digital signal will be converted by the internal DAC and sent to the headphone and line level outputs.
USB (Type B) Audio Input You can connect your computer directly to the HA-1 using a USB-A to USB-B cable. This will allow your computer to function as the digital source, and you will be able to use whatever playback software you prefer to output audio through the HA-1.
After pairing successfully, the HA-1 will display that it is Connected. Once you have paired a Bluetooth device, the HA-1 will attempt to reconnect to it when the device is in range and the BLUETOOTH input has been selected on the HA-1. If a new device needs to be paired, but the HA-1 is already connected to a device, you will need to disconnect that device in order to pair the new device.
Power On / Off When the HA-1 is initially connected to AC power, it stays in standby mode. Pressing the Power Button on the HA-1 will result in the Power Status Indicator turning blue, indicating the HA-1 has powered on. When the unit is powering on, the OPPO logo will appear on the screen.
It is possible that the Volume Knob may be inadvertently rotated when the HA-1 is off. In order to protect the output device, there is a protection mechanism built-in to the HA-1’s volume control. When the device is powered on, if the Volume Knob position is higher than the previously used volume level before the unit was powered off, the Volume Knob will automatically return to the previous volume level.
HEADPHONE AMPLIFIER HA-1 For those who use the HA-1 as both a headphone amplifier and a pre-amplifier, it is possible to assign the MUTE button to the Pre-amplifier Output only. This way the user can mute the large speakers with the MUTE button while still being able to listen to the headphones.
HEADPHONE AMPLIFIER HA-1 The following configuration screens are available: Home Screen Selection You can choose one of three screens to be the Home Screen for your HA-1. The Home Screen is displayed when the HA-1 is in its normal operation mode. ...
When using the HA-1 as both a headphone amplifier and a pre-amplifier, it may be desirable to mute the Pre-amplifier Output while listening to headphones. For example, if the HA-1 is connected to a pair of active speakers, it may be easier to mute the Pre-Amplifier Output than to turn off both speakers when you want to listen with headphones.
The following selections are available: High (default) – The headphone amplification circuit of the HA-1 applies the high gain level, which is about 18dB higher than Normal. This setting is recommended for headphones with low sensitivity or high impedance.
HA-1’s volume control is bypassed for the Pre-Amplifier Output. The Pre-Amplifier Output level will be exactly the same as the input signal level (unity gain). This feature helps when integrating the HA-1 as a high performance stereo pre-amplifier into a multi-channel home theater sound system. The following diagram...
Page 25
Although digital input sources can be configured to Home Theater Bypass mode, it is not recommended. This is because most digital source components do not offer volume control. However, if you intend to use the HA-1 as a pure DAC device connected to another pre-amplifier with proper volume control, you should configure the digital input source to Home Theater Bypass mode.
Reset Factory Default Settings If you need to reset the HA-1 to its factory default settings, please hold down the Source Selector Knob on the front panel while at the same time press the MUTE button on the remote control. All custom settings will be erased and the factory default settings will be loaded.
An updated version of the User Manual may be available online at the OPPO Digital website (www.oppodigital.com). To read or download the latest version of the User Manual, click on the HA-1 from the Product list, and navigate to the Support tab.
Specifications Designs and specifications are subject to change without notice. General Dimensions (W x H x D) 10.0 x 4.8 x 12.2 inches, 254 x 80 x 333 mm Mass 13.0 lbs, 5.9 kg Power Supply AC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensing Power Consumption 70 W (operation), 0.5 W (standby) Trigger Input...
OPPO Digital, Inc. will, at its option and at no charge as stipulated herein, repair or replace product which is returned either in person or postpaid and insured to an OPPO service center, with new or reconditioned parts or products.