Digital Zoom Up (Dzu) - Panasonic RS-232C Protocol Manual

5.7 Digital Zoom Up (DZU)

Name
Syntax
Function
Parameters
Response
Interrupt Processing
Examples of Use
Notes
Projector Model to Command Compatibility
Model PT-L711U
Number PT-L711XU
Command
Acceptance
(Yes if Command can be used, No if command cannot be used)
Panasonic
Digital Zoom Up
[STX]DZU[ETX]
This command enables the Digital Zoom Function.
None
[STX]DZU[ETX]]
The Projector must be powered on for this command to
be effective.
[STX]DZU[ETX]
Sending the DZD Command will start the digital zoom
mode. Cursor Commands (OCU, OCD, OCR, and
OCL) can be used to set the position. The Enter
Command (OEN) is used to expand the image. The
Digital Zoom Up (DZU) and Digital Zoom Down (DZD)
can be used to increase or decrease the amount of
zoom. The Menu Command (OMN) can be used to
cancel the Zoom Mode.
PT-L701U
PT-L701XU
Yes Yes
PT-L701SDU
PT-L511U
PT-L701XSDU
PT-L511XU
Yes Yes
20 20
for LCD Projector
PT-L501U
PT-L501XU
Yes
RS-232 Protocol