Watching Tv - Sony KDP-51WS550 Service Manual

Watching TV

z
For a complete list of all
the functions of the remote
control, see pages 45-50.
54
To Do This ...
Activate the remote control to
operate the TV
Turn on/off the TV
Tune directly to a channel
Adjust the volume
Mute the sound
Alternate back and forth
between two channels
Display the current channel
number (and other information)
Switch the TV's input to the
VCR, DVD player, or other
connected equipment
Change video and audio
options, customize the TV's
setup, set parental controls, and
more
Switch the TV's input between
sources connected to the TV's
VHF/UHF and CABLE inputs
Switch the TV's input to a
connected i.LINK device
Do This ...
Press TV FUNCTION
TV POWER
Press
To tune to analog channels, press
then ENTER.
For digital subchannels, press 0-9,
press 0-9 again, and then
For example, to select subchannel 2.1,
press 2 + + 1, and then press ENTER.
✍
You can also select digital channels
using the digital program guide. See
page 63 for details.
Press VOL +/-
Press MUTING (press again to unmute)
Press JUMP
The TV alternates between the current
channel and the last channel tuned.
Press DISPLAY once to display the channel
number, current time, and channel label
(if set). Press DISPLAY again to turn Display
off.
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TV's video inputs.
MENU
Press to display the Menu. For
details, see "Using the Menus" on
page 91.
Press ANT to alternate between sources
connected to the TV's VHF/UHF and
CABLE inputs.
Press i.LINK to display a list of available
i.LINK devices, and select the desired
device from the list. See page 86 for
details.
0-9 and
,
ENTER.