Hoover Shampoo- Polisher Owner's Manual page 18

Maintenance
The following section is concerned with proper maintenance of your ap-
pliance. Familiarize yourself with these home maintenance tasks and
keep this owner's manual in a convenient place where you can refer to it
when needed. Proper use and care will ensure continued cleaning effec-
tiveness.
Tank and tubing
Wash and rinse tank after each
use. To rinse tubing, put clear
water in tank, then hold and re-
lease trigger several times.
Disconnect unit from electrical
outlet before performing any of
the maintenance tasks or pro-
cedures listed below.
Furniture guard
Wipe furniture guard with dry
cleaning fluid or liquid detergent
to remove wax and dirt after each
use.
Base of unit
Remove brushes and dry bottom
of shampoo-polisher with a paper
towel or cloth before storing.
Foam generator
The foam generator, located on
base of unit near wheels, should
be removed and washed after
each use. To remove, turn l/4
turn in a counterclockwise di-
rection and lift up. Wash in a so-
lution of hot water and detergent
to clean screen. Rinse; then re-
place shampoo-polisher, match-
ing projections with slots and tur-
ning in a clockwise direction.
17