Interior Plastic Components; Glass Surfaces; Top Of The Instrument Panel - GMC Envoy XL 2003 Owner's Manual

Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth to remove din.
You may have to do this more than once.
Things like tar, asphalt and shoe polish will stain
if you don't get them off quickly. Use a clean
cloth and vinyl/leather cleaner. See your dealer
for this product.
Leather
Use a soft cloth with lukewarm water and a mild soap
or saddle soap and wipe dry with a soft cloth. Then,
let the leather dry naturally. Do not use heat to dry.
For stubborn stains, use a leather cleaner.
See your dealer for this product.
Never use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately. If dirt is allowed to work into the
finish, it can harm the leather.
5-a4
Ofrecido por www.electromanuales.com

Top of the Instrument Panel

Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones
or waxes may cause annoying reflections in the
windshield and even make it difficult to see through the
windshield under certain conditions.

Interior Plastic Components

Use only a mild soap and water solution on a soft cloth
or sponge. Commercial cleaners may affect the
surface finish.

Glass Surfaces

Glass should be cleaned often. GM Glass Cleaner
or a liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass.
See GM Vehicle Care/Appearance Materials on
page 5-88.
Notice: Don't use abrasive cleaners on glass,
because they may cause scratches. Avoid placing
decals on the inside rear window, since they
may have to be scraped off later. If abrasive cleaners
are used on the inside of the rear window, an
electric defogger element may be damaged.
Any temporary license should not be attached
across the defogger grid.