Table of Contents
Advertisement
CHANNEL MENU
Below is the Channel Menu for the FA chassis with each
of its options.
EZ PROGRAM
The EZ Program feature automatically searches for all avail-
able channels and marks them as 'Added' so that they
may be accessed via the channel Up/Down key.
CHANNEL
EZ Program
Add/Del/Surf
EZ Clock
Captions
Caption/Text
Language
Source
MOVE
In the EZ Program option, the current RF input type (Off
Air Antenna or Cable TV) is highlighted. Use the Up/
Down Arrow keys to change the RF input type.
To start the EZ Program, press the Right Arrow key. If the
Cable TV input type is selected, the EZ Program routine
will determine what type of cable system is present.
Notes:
• EZ Program clears all Surfing channels, which were
added.
• While searching for channels, all keys except for the
Power key are disabled. This prevents an incomplete
EZ Program procedure.
• Running the Auto Program will clear the factory mode,
if it was active. This happens at the end of the EZ
Program.
• If the EZ Program line in the Setup Menu is 'red', this
indicates that the module did not pass by Chassis.
When 'green', this indicates that the module did not
pass by Tracking. When 'blue', this indicates that the
module did not pass by Programming. To clear this
line to 'white', set the upper nibble of the EEPROM
location $1FFh to $B0h.
• If no channels are found then the following message
will appear: "Make sure that the cable/ant. is
connected, and try again."
USER MENUS P221-01524-00
NEXT
EXIT
ENTER
ADD/DEL/SURF
After running the Auto Program, all channels found by
the Auto Program feature will be marked 'Added' . How-
ever, some of these channels may be scrambled, or un-
desired by the customer. The Add/Del/Surf feature al-
lows the customer to selectively mark any channel as
'Deleted' or 'Added' .
To change the status of a channel, press the Up/Down
Arrow keys.
To change the channel while adding or deleting chan-
nels, use the Channel Up/Down keys, or press the de-
sired channel digits, followed by the ENTER key. If only
one channel is present, to change the channel the cus-
tomer must use the digit keypad to select a channel.
EZ CLOCK
When the EZ Clock item is selected, pressing the Right
Arrow key allows entry into the clock set menu.
CLOCK
Clock Mode
Time Set
MOVE
MOVE
DAYLIGHT SAVINGS TIME
The customer also has the option of selecting the Day-
light Savings Time to be On, Off or Auto using the Left/
Right Arrow keys.
CAPTIONS
This feature allows the customer to select: Off, On, or EZ
when Muted options.
To change the status of captions, press the Left/Right
Arrow key to select either On, Off, or EZ Mute.
CAPTION/TEXT
This feature allows the customer to activate or
desactivate Captions or Text.
Pressing the Left/Right Arrow keys sequentially through
each of the following Caption/Text options.
Caption 1 Caption 2
Text 1
Text 2
1-6
Manual
Manual
Auto
NEXT
NEXT
BACK
BACK
ENTER
ENTER
Caption 3
Caption 4
Text 3
Text 4
FA - MENUS
Advertisement
Table of Contents
