Step 5: Connect The Magnetic Mount; Antenna And Powerconnect Power - Sirius Satellite Radio XM XPress RCi User Manual

Vehicle Installation
• Sedan/Coupe With the Antenna Placed at the Front of the Roof:
1 . Feed the antenna cable from the antenna underneath the rubber
molding around the windshield . Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield and
tuck the antenna cable underneath the molding . Route the antenna
cable around and down the windshield to the lowest point .
2 . At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around the
door opening . Lift the weather stripping from the opening and tuck
the cable inside it, then replace the weather stripping . Run the cable
inside of the weather stripping to the bottom of the door opening .
3 . Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard . Coil any
excess cable in a hidden location, such as under the carpet, keeping
it away from any vehicle pedals or controls . Secure the excess cable
with wire ties .
4 . Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself
enough cable so you can
easily connect it to the
antenna connector of the
dock .
5 . Continue with "Step 5:
Connect the Magnetic Mount
Antenna and PowerConnect
Power Adapter" on page 39 .
34
Meijer.com