System And Fan Settings - Honeywell Chronotherm T8665A Installation Instructions Manual

Iv deluxe programmable wireless thermostat
Hide thumbs Also See for Chronotherm T8665A:
Table of Contents

Advertisement

T8665A CHRONOTHERM® IV DELUXE PROGRAMMABLE WIRELESS THERMOSTAT
5. Attach the zone number stickers, included with the
thermostat, onto the thermostat case on the inside
of the thermostat cover. See Fig. 5.
Place one label inside
each thermostat door.
Fig. 5. Zone stickers included with T8665A
Thermostat.
SETTINGS

System and Fan Settings

The system default setting is Heat and the fan default
setting is Auto. Use the System and Fan keys to change
the settings. See Fig. 6. The fan settings can be set for
each program period individually. The system selection is
for all the program periods.
System settings control the thermostat operation as
follows:
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes between
heating and cooling operation, depending on the
indoor temperature.
Fan settings control the system fan as follows:
On: Fan operates continuously.
Auto: Fan operates with equipment.
69-1535-3
M13426
Time
Run
Set Current
Wake
Program
Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
Fig. 6. Thermostat System and Fan key locations.
NOTE: Always press the keys with your fingertip or sim-
ilar blunt tool. Sharp instruments like a pen or
pencil point can damage the keyboard.
Programmed Temperature Settings
Refer to Table 2 for the default program. If the daytime
energy savings period is not used, press the period key
(Leave or Return) until the time is blank. The fan setting
feature is available on select thermostat models. See
Owner's Guide for complete instructions on changing the
program.
Table 2. Default Program Settings.
Period
Time
Setpoint
Wake
6:00
70°F
AM
(21°C)
Leave
8:00
62°F
AM
(16.5°C)
Return
6:00
70°F
PM
(21°C)
Sleep
10:00
62°F
PM
(16.5°C)
4
Set Program
Leave
Return
Sleep
System
Fan
M14625
Heat
Cool
Setpoint
78°F
Auto
(25.5°C)
85°F
Auto
(29.5°C)
78°F
Auto
(25.5°C)
82°F
Auto
(28°C)
System
Fan
Fan
Setting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T8665a chronotherm iv

Table of Contents