Standard Specification Of Stereo System Error Message Display Contents; Before Transporting The Unit - Sharp XL-MP130 Service Manual

XL-MP130

[3] Standard Specification of Stereo System Error Message Display Contents

Error Contents
CD Pickup Mechanism Error.
CD Changer Mechanism Error.
CD DSP Communication Error. 'ER-CD31'
Focus Not Match/IL Time Over. 'NO DISC'
TUNER PLL Unlock.
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' display will only be display when error had
been detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occurred, the unit will automatically enter to stand-by mode and Timer indicator will
flashing as below.
Example:In case of speaker abnormal
TIMER
LED OFF

BEFORE TRANSPORTING THE UNIT

The following process need to be taken after set tapering/parts replacement.
1. Press the POWER ON/STAND-BY button to enter stand-by mode.
2. While pressing down the
number will be displayed as "CN******".
3. Press OPEN/CLOSE button until "WAIT"--> "FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
DISPLAY
'ER-CD01'
'ER-CD**' (*)
87.50
FM MHz
FLASHING
ON
NO. 1
OFF
NO. 2
1 FRAME
NO. 1 : +B PROTECTION
NO. 2 : Speaker abnormal
button and the X-BASS/DEMO button, press the POWER ON/STAND-BY button. The Micro Computer version
Notes
PU-IN SW Detection NG.
10: CAM SW Detection NG during normal operation
11: CAM SW Detection NG during initialize process
20:TRAY SW Detection NG during normal operation
21:TRAY SW Detection NG during initialize process
DSP COMMUNICATION ERROR.
PLL Unlock.
ON
OFF NO. 1
2 – 5
FLASHING
OFF
NO. 2
(REPEAT)