Stainless Steel Surfaces; Care And Cleaning Of The Cooktop; Control Knobs - LG LCG3091ST Service Manual

Hide thumbs Also See for LCG3091ST:

Table of Contents

STAINLESS STEEL SURFACES

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm soapy water or a stainless steel cleaner or

polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for

cleaning the stainless steel surface.

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of

a dealer nearest you, please call our toll-free customer service number:

1-800-243-0000

or visit our website at:

us.lgservice.com

It's a good idea to wipe the control panel after each use of the cooktop.

Clean or rinse the control panel by using a damp cloth.

Use mild soap and water or a 50/50 solution of vinegar and water. Use clean water for rinsing.

Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on

the control knobs - they can cause damage to the finish of the knobs.

Do not try to bend knobs by pulling them up or down or by hanging a towel or other such loads.

This can damage the gas valve shaft.

The control knobs may be removed for easier cleaning.

Make sure the knobs are in the "OFF" positions and pull them straight off

the stems for cleaning.

To reinstall the knobs, make sure the knob has the "OFF" position

centered at the top and slide the knob directly onto the stem.

NOTE: To prevent mis-operation during cleaning of the control knobs,

Surface burner knob

Unplug your cooktop.

LGE Internal Use Only

-24-

Only for training and service purposes

Table of Contents

Lcg3691st