Advertisement
Quick Links
2013 Nissan Altima Sedan
CM6200/Blade-AL Install
TOOLS AND PARTS
1. Digital Multi-Meter
2. Crimpers
3. Soldering Iron and Solder
4. Panel Removal Tool(s)
5. 10mm socket
6. Phillips Head Screwdriver
7. CM6200
8. ADS Blade-AL
9. (1) Relay and (5) 1A Diodes
Important!
This wiring information is provided free of charge on an "as is" basis, without any representation or warranty. It is the dealer's
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Advertisement
Summary of Contents for Nissan 2013 Nissan Altima Sedan CM6200
- Page 1 2013 Nissan Altima Sedan CM6200/Blade-AL Install TOOLS AND PARTS 1. Digital Multi-Meter 2. Crimpers 3. Soldering Iron and Solder 4. Panel Removal Tool(s) 5. 10mm socket 6. Phillips Head Screwdriver 7. CM6200 8. ADS Blade-AL 9. (1) Relay and (5) 1A Diodes Important! This wiring information is provided free of charge on an “as is”...
- Page 2 2013 Nissan Altima Sedan CM6200/Blade-AL Install Connections FUNCTION COLOR LOCATION POLARITY 12 VOLTS (40A) Green Backside of driver’s side dash fuse box, white 1 pin plug 12 VOLTS (40A) White BCM, behind instrument cluster, white 15 pin plug, pin 11...
- Page 3 2013 Nissan Altima Sedan CM6200/Blade-AL Install Disassembly 1. Remove panel from the front, left hand side of the center console. 2. Remove (2) 10mm bolts holding the hood and gas flap release levers in place. 3. Remove the silver trim piece on the left side of the radio/climate control panel.
-
Page 4: Body Control Module
2013 Nissan Altima Sedan CM6200/Blade-AL Install Body Control Module Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. - Page 5 2013 Nissan Altima Sedan CM6200/Blade-AL Install Black 24-Pin Connector @ BCM Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 6 2013 Nissan Altima Sedan CM6200/Blade-AL Install Green 40-pin Connector @ BCM Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 7 2013 Nissan Altima Sedan CM6200/Blade-AL Install Black 40-pin Connector @ BCM *The rear/mirror defroster wire will only test while the engine is running. Program as a latched (-) output from the remote starter. Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter.
- Page 8 2013 Nissan Altima Sedan CM6200/Blade-AL Install Gray 24-Pin Connector @ BCM Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 9 2013 Nissan Altima Sedan CM6200/Blade-AL Install +12V Power to Remote Start Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 10 2013 Nissan Altima Sedan CM6200/Blade-AL Install Brown Connector @ Driver’s Side Fuse Box Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 11 2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections, under hood Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 12 2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections Continued Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.
- Page 13 2013 Nissan Altima Sedan CM6200/Blade-AL Install (-) Horn Trigger Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information.