Table of Contents
Advertisement
Install the monitor
1.
Carefully hold the overhead monitor up to the metal mounting plate.
2.
Screw in the four CM 4 x 8 screws making sure the wires are not in the way.
3.
Reconnect the battery.
4.
Check the car's brake lights, blinkers, wiper, etc. to ensure they are working properly.
Wiring diagram
OHM888VD / OHM1088VD / OHM1588VD
Mounting the player
Top of the unit showing cable connections
B+ (YELLOW)
ACC (RED)
GND (BLACK)
DOOR (GREEN)
Polarity switch
27
Advertisement
Table of Contents
