Table of Contents
Advertisement
TRI
MEM
Mode Functions
SCAN
WATCH
ESC
Operation
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
To turn VOX mode on or off:
Mode/Power
1. Press the Mode/Power button until the VOX
icon flashes on the display. The current On or
Off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX On or Off.
VOX Icon
Vox
3. When VOX is turned on or off, press the
Mode/Power button to enter the new setting
and proceed to other functions, or press Talk
TRI
MEM
SCAN
WATCH
ESC
button to enter the new setting and return to
TRI
MEM
SCAN
WATCH
ESC
Standby mode.
Channel Button
To set VOX sensitivity:
Mode/Power
1. Press the Mode/Power button until the VOX icon
flashes and the current sensitivity level is displayed.
R
Vox
X
HI MED LO WX
VOX Sensitivity Level
2. Press the Channel Up or Channel Down
button to change the setting.
TRI
MEM
SCAN
WATCH
BURP Power Saver
ESC
3. When VOX sensitivity is selected, press the
Channel Button
Mode/Power button to enter the new setting
and proceed to other functions, or press Talk
button to enter the new setting and return to
Standby mode.
10
radio can be used "hands-free," automatically
®
The current VOX sensitivity level is displayed
with letters "L" and a Number 1 through 5,
with Number 5 being the most sensitive level
and Number 1 being the least sensitive level.
TRI
MEM
SCAN
WATCH
ESC
Introduction
Operation
Ten Call Tone Settings
•
You can choose between ten different Call Tone Settings to transmit
a call alert.
Mode/Power
Call Tone Setting
TRI
MEM
SCAN
WATCH
ESC
Channel Button
VibrAlert
and Call Alert
®
R
X
Call Tone On/
Vibrate On
R
X
Call Tone On/
Vibrate Off
BURP Power Saver
BURP Power Saver
Customer Assistance Warranty
To change a call tone setting:
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Your microTALK
radio can alert you to incoming
®
Vox
signals by sounding an audible call tone, by
HI MED LO WX
vibrating silently or both.
To change call settings:
TW DCS Scan
1. Press the Mode button until the Call Setting
CTCSS Mem
icon flashes on the display. The current setting
Vox
("01" vibrate + ring, "02" ring only) is displayed.
HI MED LO WX
2. Press the Channel Up or Channel Down button to
change the call setting.
TW DCS Scan
3. Choose one of the following:
CTCSS Mem
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Nothing Comes Close to a Cobra
•
•
11
®
Hide quick links:
Advertisement
Table of Contents
