Reconnect To A Bluetooth Device; Disconnect Or Unpair From A Bluetooth Device - Samsung Galaxy Note PRO User Manual

Reconnect to a Bluetooth Device

When you have paired your tablet with another device, you
should be able to reconnect it automatically by turning on
Bluetooth on your tablet.
1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Make sure that the target device is discoverable so that
your device can find it. Refer to the instructions that
came with the target device to find out how to set it to
discoverable mode.
4. Touch Scan. Your device will start to scan for Bluetooth
devices within range.
5. When you see the name of the target device displayed
in the Available devices section, touch the name. Your
tablet will attempt to pair with the target device.
• If requested, enter the passcode displayed on the target
device.
If you still cannot reconnect, try to disconnect or unpair from
the target device, and then follow the instructions for
"Pairing with a Bluetooth Device" on page 83.
Apps Settings
Bluetooth.

Disconnect or Unpair from a Bluetooth Device

Follow these instructions to disconnect or unpair your tablet
from a Bluetooth device.
Disconnect from a Bluetooth Device
1. From a Home screen, touch
Connections tab
.
2. Touch the OFF/ON button to turn Bluetooth ON
3. Touch the connected device, and then touch OK to
disconnect.
Unpair from a Bluetooth Device
You can make your tablet forget its pairing connection with
another Bluetooth device. To connect to the other device
again, you may need to enter or confirm a passcode again.
1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Touch the connected device, and then touch Unpair.
Apps Settings
Bluetooth.
Apps Settings
Bluetooth.
Connections 84
.
.