Power Saving Function - HP GDM-FW9012 Service Manual

POWER SAVING FUNCTION

This monitor meets the power-saving guidelines set by VESA,
E S
NERGY TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption in three stages as shown below.
Power mode Power
consumption*
normal 170 W
operation
1 standby 15 W
2 suspend 15 W
(sleep)**
3 active off*** 1 W
(deep sleep)**
power off 0 W
* Figures reflect power consumption when no USB compatible
peripherals are connected to the monitor.
** "Sleep" and "deep sleep" are power saving modes defined by the
Environmental Protection Agency.
*** When your computer enters power saving mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen before the
monitor enters active off mode. After a few seconds, the monitor
! (power)
enters power saving mode.
indicator
green
green and orange
alternate
green and orange
alternate
orange
off
GDM-FW9012(E)