Table of Contents
Advertisement
Magellan RoadMate Photo Manager
The Magellan RoadMate Photo Manager enables you to transfer image files in multiple
formats from your computer to an optional memory card installed in your Magellan
RoadMate 2200T. The number of images you can load depends on the size of the card.
Insert the memory card into the memory card slot. Turn on your Magellan RoadMate
2200T by pressing and holding the Power button for approximately 2-3 seconds (Ten
seconds if the Magellan RoadMate 2200T is not in sleep mode.) When the Warning
screen appears, insert the small end of the USB cable into the USB port on your Magellan
RoadMate 2200T, and the large end into an available USB port on your computer.
Launch the Magellan RoadMate Tools
application. From the Magellan RoadMate
Tools screen, click on
.
Photo
The left side of the window shows the
contents of your computer and the right side
of the window shows the contents of the
memory card installed in your Magellan
RoadMate 2200T.
Locate the image files you wish to load.
When you have selected a file, the
Transfer
arrow will turn green. Click on the
Transfer
arrow to copy the file(s) to the memory
card.In the same way, if you have loaded
image files onto a memory card from another
computer, you can copy the files from the
card to your computer.
When you have finished copying files,
remove the USB cable from the Magellan
RoadMate 2200T.
37
Magellan RoadMate Photo Manager
Advertisement
Table of Contents
