Philips HD7827 Manual page 12

EnglisH
12 12
the water reservoir thoroughly in hot water, if
necessary with some washing-up liquid.
Now your Philips SENSEO
for use.
using the machine
1 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
The MIN indication on the water reservoir
indicated the minimum amount of water required
for brewing coffee. Always fill the water reservoir
beyond the MIN level.
2 Press the on/off button 3.
, The light ring flashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
, The coffee machine is ready for use when
the light ring lights up continuously.
Note: If the light ring flashes rapidly, the water reservoir
does not contain enough water for brewing one cup of
coffee.
3 Release the lid by moving the lever upwards.
, The lid opens automatically.
4 Place the appropriate pod holder in the
machine.
Note: Make sure the pod holder is clean and the
sieve in the centre is not clogged, e.g. with loose coffee
grounds.
coffee machine is ready
®