Optoma DP-3515 Serivce Manual page 45

Delta Elec. Inc.
Make sure that the USB cable is firmly connected between projector and computer
Connect the power cord to the projector, and move the power switch in its ON position (if
available) so that projector is in the STAND-BY mode.
<Down>, <Up>, <Right>, <Up>
Press
using the IR remote controller for those with limited keypads. The power and lamp LED
shall blink and the Projector Control mode will be enabled.
Company Confidential
45
EP7155i & EP1691i
key in sequence using keypad buttons, or
The New Hardware Wizard launches for the first
time. Windows detects a new USB device
attached.
Select "No, not this time"
Click on the "Next" button to continue
(This dialog may change on different Windows
version)
Select "Install the software automatically"
Click on the "Next" button to continue
* In case the wizard cannot find the driver (the
ProjectorControl.inf), please select the other
advanced option and specify the driver location
manually. (Normally at
Projector\Projector Flash Tool
Windows updates the USB Projector Control
driver when found
Optoma_______________________
C:\Program Files\Digital Zoom
)
Delta____________
ver.00
2008/12/24