Onboard Power LED
An Onboard Power LED is located at LE1
on the motherboard. When LE1 is on, the
AC power cable is connected. Make sure to
disconnect the power cable before removing
or installing any component. See the layout
below for the LED location.
BMC Heartbeat LED
A BMC (Baseboard Management Con-
troller) Heartbeat LED is located at DP1.
When DP1 blinks, the BMC functions
properly. Refer to the table on the right
for details. Also see the layout below for
the LED location.
B
Onboard PWR LED Indicator
Off
On
BMC Heartbeat LED Indicator (DP1)
Green: Blinking
A
LSI 1068E
2-37
Chapter 2: Installation
LED Settings
System Off
System on, or
System off and PWR
Cable Connected
LED Settings
BMC is ready for use
A. Onboard PWR LED
B. BMC Heartbeat LED