Adf Snap-In Pad Module Removal And Mounting - Lexmark X4500 Service Manual

ADF Snap-in Pad Module Removal and Mounting

After scanning approximately 100,000 pages through the ADF, the ADF pad module may
be worn and you may experience problems with document feeding. In this case, replace
the ADF pad module.
To remove the ADF snap-in pad module:
1. Push the ADF unit backward.
2. Gently pull out the snap-in pad module.
To mount the ADF snap-in module,
1. Hold both arms of the snap-in pad module.
2. Gently place the module into the pad holder.
3-4
Service Manual
Note: Inspect the feed roller and clean as necessary.
4036-304