4.9
Expansion Memory
Removing the Expansion Memory
To remove the memory module, make sure the computer is in boot mode then remove the
wireless LAN compartment cover:
1.
Push the latches securing the memory module to the outside to release it. A spring will force
one end of the module up.
2.
Grasp the module and pull it out.
3.
Seat the cover and secure its screws.
CAUTION: Do not touch the connectors on the expansion memory or on the
computer. Debris on the connectors may cause memory access problems.
Satellite M60 Series Maintenance Manual
Figure 4-13
Removing the expansion memory
4 Replacement Procedures
[CONFIDENTIAL]
4-27