Top Cover - HP dv6000 Maintenance And Service Manual

Remove the camera cable (2) from the display enclosure.
24.
NOTE:
Reverse this procedure to reassemble and install the display assembly.

Top cover

Description
For use only with computer models equipped with a fingerprint reader (includes TouchPad and cable
and fingerprint reader board and cable)
For use only with computer models not equipped with a fingerprint reader (includes TouchPad and
cable)
Fingerprint reader board (includes fingerprint reader board cable)
Before removing the top cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Disconnect the power button board cable and the LED board cables from the system board (see
5.
Keyboard on page
Remove the following components:
6.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
66 Chapter 4 Removal and replacement procedures
The camera cable is included in the Display Cable Kit, spare part number 446489-001.
Battery on page
58).
Hard drive on page
Optical drive on page
Switch cover on page
40).
45)
52)
54)
Spare part number
446509-001
446508-001
446511-001
ENWW