Data Format Editor Instructions - Honeywell 4600g Quick Start Manual

Data Format Editor Instructions

The following are abbreviated instructions for
entering a data format. For complete instructions
refer to your User's Guide, available at our website,
www.honeywell.com/aidc.
1. Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary
Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any barcode type
5. Length: scan 9999 for any length barcode.
6. Editor commands: use the Programming Chart
that follows.
7. Scan Save to save your entries.
Enter Data Format
9
Clear All Data Formats
Save