MSI 870-C45 FX V2series User Manual page 19

MS-775
Fan power Connectors: CpUFAN, SySFAN, SySFAN2
the fan power connectors support system cooling fan with +2V. When connect-
ing the wire to the connectors, always note that the red wire is the positive and
should be connected to the +2V; the black wire is Ground and should be con-
nected to GNd. if the mainboard has a System hardware Monitor chipset on-
board, you must use a specially designed fan with speed sensor to take advantage
of the CpU fan control.
CpUFAN SySFAN/2
S/pdiF-out Connector: JSp
this connector is used to connect S/pdiF (Sony & philips digital interconnect
Format) interface for digital audio transmission.
Front panel Connectors: JFp, JFp2
these connectors are for electrical connection to the front panel switches and
Leds. the JFp is compliant with intel Front panel i/o Connectivity design
®
Guide.
JFp2
JFp
9