Table of Contents
Advertisement
TM
2.9 SLI
and Quad SLI
This motherboard supports NVIDIA® SLI
Interface) technology that allows you to install up to two identical PCI Express x16
graphics cards. Currently, NVIDIA® SLI
Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA®SLI
the drivers from the NVIDIA® website: www.nvidia.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA® certified PSU. Please refer to
the NVIDIA® website for details.
2.9.1 Installing Two SLI
TM
Operation Guide
TM
and Quad SLI
TM
and Quad SLI
TM
-ready graphics cards that are NVIDIA® certified.
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE2 slot
and the other graphics card to PCIE5 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
(Scalable Link
TM
technology supports
TM
technology. Download
Z97 Extreme4
29
Hide quick links:
Advertisement
Table of Contents
