Adding Iscsi Drives - Iomega STORCENTER px12-350r White Paper

Adding iSCSI drives

The iSCSI service must be enabled before iSCSI drives can be created. Refer to the Configuring iSCSI on the Iomega
StorCenter Pro ix4-200r NAS Server (http://download.iomega.com/com/nas/pdfs/iscsi_200r_wp_0909.pdf ) white paper
about how to configure iSCSI. This section assumes iSCSI configuration is already finished.
1. Go to Shared Storage and click the Add button.
2. Select iSCSI Drive as Shared Storage Type. Enter a name for the drive and choose the Storage Pool where the
drive is placed.
3. Specify a size for the drive; the drive size can be manually increased later.
4. By default the Enable security box is checked to allow you assign access privileges for this iSCSI drive.
Figure 14 Create an iSCSI drive
White Paper
IOMEGA STORAGE PROVISIONING AND RAID MIGRATION CONFIGURATION GUIDE
14