Optiflex Status Leds; Camera Status; Camera Activity; Power - Honeywell Optiflex Installation And Setup Manual

Optiflex Installation and Setup Guide

Optiflex Status LEDs

Camera Status

Off – All detected cameras are connected
Flashing – At least one camera lost.

Camera Activity

On – At least one camera is detected
Off – No cameras detected
Flashing – At least one camera is being viewed

Power

On – power applied to Optiflex
Off – No power applied to Optiflex
NOT
USED
CAMERA
STATUS
CAMERA
ACTIVITY
POWER)
4-2
optiflex-006-V0