Warning Messages; Caution; General Information About Body Fat And Body Water - Taylor 5743 Instruction Manual

B
= Initialization error. If this error occurs after
ER0
re-locating the scale, please slightly press the scale
again to re-initialize the scale.
= Instability error. Step off and back onto the
ER 1
scale, standing still while your weight computes.
E R2 = Overload Warning. The maximum weigh-
ing capacity of the scale has been exceeded.
Remove the weight immediately; otherwise, per-
manent damage to the scale will occur.
ER3 = Contact error. Body impedance is beyond
the technical limit. Clean bottom of feet with a
damp cloth, leave slightly damp, and repeat meas-
urement again, maintaining maximum contact
between your feet and the metal sensors.
ER4 = Body fat percentage is beyong the range. Do
not wear shoes or socks during measurement.
Cleaning bottom of bare feet with a damp cloth and
leaving them slightly damp may help to improve the
contact . Repeat measurement.
Body water percentage is beyong the range.
ER5 =
Do not wear shoes or socks during measurement.
Cleaning bottom of bare feet with a damp cloth and
leaving them slightly damp may help to improve the
contact. Repeat measurement.