Door Disassembly For; Remove Refrigerator Door; Replace Refrigerator Door - Kenmore 795.71303.010 Service Manual

3-6 DOOR DISASSEMBLY

3-6-1 REMOVE REFRIGERATOR DOOR

IMPORTANT: Before you begin, turn the refrigerator OFF and
Unplug it. Remove food and any bins from doors.
Left Door
Loosen the cover screws (1).
Disconnect door switch wire (2).
Loosen hinge bolts (3).
Lift off the top hinge (4).
Place the door on a non-scratching surface with the inside up.
Right Door
Loosen the cover screws (1).
Disconnect door switch wire (2).
Disconnect wire harness (5).
Loosen hinge bolts (3).
Loosen ground screw (6).
Lift off the top hinge (4).
Place the door on a non-scratching surface with the inside up.
CAUTION:
When removing top hinge, be careful that the
door does not fall forward.
1
2
3
4

3-6-2 REPLACE REFRIGERATOR DOOR

Lower the door onto the middle hinge pin (7).
Make sure the door is aligned with the cabinet.
Replace the top hinge (4) installing hinge
screws (3) to secure it.
Make sure the gasket on the door is flush
against the cabinet and is not folded.
Support the door on the handle side while
securing. And make sure the door is straight
and the gap between the doors is even across
the front.
Install the ground screw (6).
Connect the door switch wire (2).
Tighten the cover screw (1).
Lower the door onto the middle hinge pin (5).
Make sure the door is aligned with the cabinet.
Replace the top hinge (4) installing hinge
screws (3) to secure it.
Make sure the gasket on the door is flush
against the cabinet and is not folded.
1
Support the door on the handle side while
securing. And make sure the door is straight
and the gap between the doors is even across
2
3
the front.
Connect the door switch wire (2).
6
Tighten the cover screw (1).
5
4
Fig. 8
- 9 -
Right Door
Left Door
5
7
Fig. 9