Motorola Tarpon V. 120C Service Manual page 15

V.120c
Display Removal:
The electrometric on the display makes contact
with the power contacts on the PCB. There are
two locating pins on the display are aligned and
the four holding tabs are grabbing the board.
Make sure you release the tabs and gently lift the
display. Once you free the tabs on one side, the
other side comes off easily.
Keypad Removal:
Remove the keypad from the front housing as
shown.
Speaker Removal:
There is a adhesive backing to the speaker,
hence make sure you pry the speaker open by
the help of a bezel stick.
Pads On
The PCB
Holes For
Display
Locating
© 2001 Motorola, Inc.
Disassembly
Pins
15