Operating Instructions - Nesco American Harvest VS-02 Care/Use Manual

Electric vacuum sealer

Hide thumbs Also See for American Harvest VS-02:

User manual (9 pages)

Table Of Contents

Table of Contents

Available languages

MAKING A BAG WITH THE ROLL

1. The Bag Cutter must be positioned at either end of

the cutter slide slot before cutting.

2. Open the rear lid and place bag roll into Roll Storage

Compartment.

3. Pull the bag material out of the Roll Storage to the

suitable length you want (Pull out enough of the

bag roll to hold items to be vacuum packed plus an

additional 3 inch. Allow another 1 inch for each time

the bag will be resealed.) then close the rear lid.

4. Press and slide Bag Cutter from one side to the end

with your hand stressing the bag steadily to achieve a

better effect.

5. Open the lid and place either open end of bag

material on Sealing Strip, close it. Press down on the

lid until two click sounds are heard.

6. Press the "Seal Only" Button to start sealing.

7. When the Seal Indicator Light turns off, sealing is

completed. Press both unlock buttons.

8. Open the upper lid and take out the bag.

9. Now the bag is ready, you can vacuum package with it.

VACUUM PACKAGING YOUR FILLED BAG:

1. Put the items inside the bag.

2. Open the lid, clean and straighten the open end of

the bag, make sure there no wrinkle or ripples.

3. Place the open end of the bag in the vacuum

chamber beneath the air intake.

4. Close the lid and then press on both sides of the lid

until two "click" sounds are heard.

5. Press the "Vacuum/Seal" Button. The bag will be

automatically vacuumed and sealed.

6. When the Indicator Lights of "Seal Only" and "Seal/

Vacuum" turn off, the process is completed. Press the

two Unlock Buttons, lift lid and remove the bag.

7. Refrigerate or freeze if needed.

NOTE: For best sealing effect, it is better to let the

appliance cool down for 2 minutes before using it again.

Wipe out any excess liquid or food residue from the

vacuum chamber after each use.